Protect Your Employees, Your Operation, and the Environment with the Eaton Guardian Sleeve
TIPCO supplies the equipment you need to safely operate your hydraulic hoses and lines, which are subject to tremendous stress and wear during their use in high pressure, high temperature, or high pulsation applications. TIPCO is a proud authorized retailer of the Eaton Guardian Sleeve, the most advanced equipment available in hydraulic hose protection. Eaton engineered its Guardian Sleeve to mitigate against the tough conditions your equipment encounters daily, and designed this revolutionary product to protect your employees, safeguard the environment, and keep your operation running.
The Eaton Guardian Sleeve’s ultra-tight weave disperses pressure and fluids that may escape during a hose burst or pinhole leak, and minimizes the damage caused by extreme heat and water abrasion. Its innovative design extends the lifespan of your equipment and protects your employees from the damage caused by spills, slippage, or hose movement that may result from hydraulic hose failure. The sleeve is available for -4 through -24 hose sizes, making it versatile enough for a wide variety of applications.
Protects in High-Pressure Applications
|Burst Pressure||16,000 psi||Capable of containing hose bursts of up to 16,000 psi|
|Pin Hole Leak Pressure||4,000 psi||Sustained 4,000 psi hole deflection from focused 1mm pin hole|
|Abrasion Cycles||250,000||Holds up to 250,000 abrasion cycles per ISO 6945|
Compatible with most chemicals associated with fluid-conveyance applications
|Mineral and vegetable oil||Very Good|
|Ionic metallic solutions||Very Good|
|Diluted bases||Very Good|
|Carbon tetrachloride||Very Good|
|Chloring based solvent||Very Good|
|Mold, Bacteria, Moths||Very Good|
|*Strong and concentrated acids such as HCl or formic acid may have some corrosive action|
Meets Safety Standards:
- Meets line of sight operator specification EN982 ISO norm 833 EN414 and ISO 3457
- Meets ASTM D6770 for abrasion resistance of textile webbing
- Meets abrasion standard ISO 6945
- Meets Fed-STD191-Test Method 5309 for abrasion
- MSHA approved # IC-234/0 – Meets standard application procedures for acceptance of Flame Resistance Solid Products taken into mines
- Meets Conductivity Requirements of ISO 8031
Suitable for Applications in a Variety of Industries
|Machine Tools||Material Handling||Metals|
|Power Generation||Primary Metals||Truck and Bus|
With the Eaton’s “line of sight” sleeving, both equipment operators and the environment are guarded from the adverse effects of hose failures.
For more information about the Eaton Guardian Sleeve and how it works for your application, give us a call at 410-356-0003, Chat Below or Download
the Eaton Guardian Sleeve Sheet.
Our experts will find the best match for your needs!